DTS-
ТОР
MULTIFUNCTIONAL TELEPHONE
User Manual
page 2/51
armtel.com
© Armtel
SAFETY PROVISIONS
During installation and operation observe the safety measures specified by local codes
and regulations on electrical safety.
During installation and operation, observe safety precautions laid out in “Occupational
safety rules when operating electrical installations” when working with electrical receivers
with voltage of up to 1000 V.
To avoid electric shock, do not:
−
turning on the device with damaged power and interface cables or connectors.
−
operate the product with damaged power supply and communication cables, or
using RJ-45 socket.
−
connect and disconnect the sockets and plugs for connecting the headset and
EC-TOP units only when the power and communication cables are disconnected.
−
never disassemble the product connected to the power and interface bus. Install
and connect the product only when the assembly is de-energized.
ATTENTION!
NEVER DISMANTLE THE PRODUCT CONNECTED TO MAINS.
Installation and connection of the product only in a de-energized state.
Do not use the product in rooms with high humidity (more than 80 %) or conductive
dust.
В
In order to ensure fire safety, follow the following rules:
−
before connecting the product to the power supply, make sure the power and
communication cables are properly insulated;
−
protect power and communication cables from damage.
The safety provisions for specific operations described in this manual are marked with:
ENG
