ARMTEL DTS-TOP User Manual Download

Page: 3 / 56

DTS-

ТОР

MULTIFUNCTIONAL TELEPHONE

User Manual

armtel.com

page 1/51

[email protected]

INTRODUCTION

This User Manual applies to «DTS-

ТОР

multifunction digital phone» RMLT.465484.002

manufactured by Armtel LLC, and is intended to familiarize the User with the device and the

procedure for its operation at the installation site.

Is the subscriber equipment for operation within digital intercom communication

system controlled by DCN-2 central exchange. system manufactured by Armtel LLC.

Short name of product – DTS-TOP.
Maintenance personnel for DTS-TOP shall be appointed by the management at

the installation site.

The maintenance personnel shall be required to know the operating procedure of

DTS-TOP to the extent provided for by the User manual.

The maintenance personnel shall be required to know the operating procedure of

DTS-TOP to the extent provided for by the User manual.

Example of DTS-TOP designation during ordering and in documentation:

«DTS-

ТОР

multifunction digital phone» RMLT.465311.004 or RMLT.465311.004-01

depending of product version (see

1.1.1

ATTENTION!

In connection with systematic work to improve the design and

manufacturing technology, it is possible some discrepancy between the description and

the supplied product, which does not affect its operation or maintenance.

ENG

Summary of Contents for DTS-TOP

























































Search results

Summary of Contents for DTS-TOP

Reviews:

Related manuals for DTS-TOP

Brands by name

Popular brands

ARMTEL DTS-TOP, User Manual

Search results

Summary of Contents for DTS-TOP

Reviews:

Related manuals for DTS-TOP

Brands by name

Popular brands