DTS-
ТОР
MULTIFUNCTIONAL TELEPHONE
User Manual
page 44/51
armtel.com
© Armtel
B.3
The left (1) and right (2) brackets from the delivery set are connected by the
mounting plate (3) (see Figure B.3) with the screws from the delivery set and fixed on the
wall through the holes (4). After fixing the brackets, the mounting plate is removed. (see
Figure B.3):
Figure
B.3 – Brackets for wall mounting DIS-TOP
B.4
B.4 In holes 1, 4, 5, 8 on the lower surface of the DIS-TOP base (see Figure B.1),
screws for plastic 3 × 8 mm from the location kit are screwed in so that the head of the screw
does not reach the base of the base on 2-3 mm, after which the heads of the self-tapping
screws are sunk into the holes (5) - see Figure B.3, and moving down the remote control is
mounted on the brackets. In case of play on any side of the remote control, it is
recommended to tighten the corresponding self-tapping screw by 1-2 turns.
ENG
