ARMTEL DTS-TOP, User Manual

Page: 13 / 56

DTS- ТОР MULTIFUNCTIONAL TELEPHONE
User Manual
armtel.com page 11/51
info@armtel.com © Armtel
1.1.5.2 DTS-TOP is manufactured in plastic flat enclosure complete with detachable
stand that allows the desk enclosure to be inclined for better visibility of a keypad and a
display.
Two-colored LED indication is equipped with the upper part of the front panel
(located over the display). Which indicates the absence of communication and the type of
icoming or outgoing communication with a constant glow or flashing (Appendix D).
To impart stability, the stand is equipped with rubber protruding legs. When desk-
mounted, to adjust the stand in desktop version, see Figure 3 :
a) b) c)
Figure 3 – Adjustment of the stand for Desktop
To adjust the stand:
a) turn the unit upside down disconnecting it from the power supply and
interfaces, pull out four plugs from the grooves to install the stand and
simultaneously press the two latches at the base of the stand;
b) insert the stand stoppers in the far-end grooves in the bottom of the enclosure;
c) push the stand into the near-end grooves.
Remove the stand in the reverse order.
1.1.5.3 A plate with the designation of sockets for external connections located on
the base of the enclosure is shown in illustrated at Figure 4 .
Figure 4 – The plate with the designation of sockets for external connections
1.1.5.4 To ensure a reliable connection of DTS-TOP cables, they can be placed in special
grooves in the base of the enclosure (4 pcs.) and in the stand (2 pcs.) in accordance with
Figure 5 . When DTS-TOP is supplied to the customer, the grooves in the base of the
enclosure are closed with special plugs (not shown in Figure 5 ), which must be removed from
the grooves before the cables are laid.
ENG