ACM-IP2.1
ANALOGUE SUBSYSTEMS MODULE
User Manual
armtel.com
стр.
25/32
© Armtel
ENG
4 REPAIR
T Scheduled repairs of the product are not provided for.
Unscheduled repair shall be performed by the manufacturer at the request of the user.
The location, time, procedure and cost of the work shall be agreed on in advance.
5 STORAGE
Product storage conditions – in the manufacturer’s consumer package in unheated and
ventilated warehouses or storage facilities with controlled air-conditioning with
a temperature range up 5 °С to 40 °С.
Air in the product storage premises must be free of corrosive foreign matter (acid
fumes, alkalis).
6 TRANSPORTATION
The product shall be transported according to group Zh as per GOST 23216-78 and
group 5 (OZh4) as per GOST 15150-69 in consumer package as a packaging unit by road,
river, railway and air transport (except unsealed compartments), with compliance with the
following conditions:
−
absence of direct ingress of atmospheric precipitation, water splashes, solar UV
radiation, dust, sand, aerosols;
−
the shipping container on the shipping vehicle is fastened to avoid falling and
collision..
N
ote
— ACM-IP2.1 transportation is allowed as part of a cabinet (rack), in which
equipment designed for installation in a cabinet is installed.
АСМ
-IP2.1 must be latched to
the DIN-rail.
7 DISPOSAL
The product is not subjected to utilization combined with domestic waste and must be
delivered to a special center for utilization of electronic products. The operating organization
must take full responsibility for the product utilization.
