ACM-IP2.1
ANALOGUE SUBSYSTEMS MODULE
User Manual
armtel.com
стр.
9/32
© Armtel
ENG
1.5 Design
1.5.1 ACM-IP2.1 represents a printed board with installed electrical components. The
board is installed into the housing (see Figure 2) intended to secure a standard DIN-rail
35 mm.
ACM-IP2.1 weight does not exceed 0,2 kg. External appearance and overall dimensions
are given at Figure 2.
1
–
line connector (connection of 1-8 control lines); 2
–
transparent flap cover; 3
–
housing;
4
–
nameplate; 5
–
offset lines 5…8 on/off switch (counter call on 5-8 control lines);
6
–
offset lines 1…4 on/off switch (counter call on 1-4 control lines); 7
–
CP on/off switch (
А
-
В
line output transformer central point control); 8
–
CPU0 operation readiness LED indicator;
9
–
CPU1 LED (mot used); 10
–
DEF button (reset to factory settings); 11
–
RES button (reset);
12
–
Eth connector to connect to Ethernet network with PoE support; 13
–
A B CP +V connector
to connect to analog control line and transformer central point control line;
14
–
–IN –OUT 0 V 0 V connector to connect to external 48VDC power supply;
15
–
attachment latch.
Figure 2
–
ACM-IP2.1 external appearance and overall dimensions
