Page 18
# 48387H005
5. Check for correct voltage at unit (with unit operating).
6. Check amp-draw on blower motor.
Unit nameplate _________ Actual _________
Start-Up and Performance Checklist
Job Name _______________________________
Job No. ________________
Date ______________
Job Location _____________________________
City ___________________
State ______________
Installer _________________________________
City ___________________
State ______________
Unit Model No.______________
Serial No. ___________________
Service Technician ________________________________________
Nameplate Voltage ______________
Rated Load Ampacity ________
Compressor _______________
Outdoor Fan ___________________
Maximum Fuse or Circuit Breaker ________________________
Electrical Connections Tight?
Indoor Filter Clean?
Supply Voltage (Unit Off) ________________
Indoor Blower RPM _____________
S.P. Drop Over Indoor (Dry) ____________
Outdoor Coil Entering Air Temperature _____________
Voltage with Compressor Operating _____________
Discharge Pressure ___________
Vapor Pressure ____________
Refrigerant Charge Checked?
Outdoor Fan Checked?
Refrigerant Lines: Leak Checked?
Properly Insulated?
Service Valves: Fully Opened?
Caps Tight?
Thermostat: Calibrated?
Properly Set?
Level?
