length of 15mm copper tails
will define service valve position,
ideally adjacent to an access panel
IMPORTANT: Ensure
the arrows on the
valves bodies match
the direction of
the water flow.
Fig 9
view from rear showing
Fig 10
View from front showing service
valves fitted to pipework
supply pipes
(from above)
isolator screw
filter access
where access panel is
available above product,
service valves can be
orientated as shown
supply pipes
(from above)
in-line servicing valve should be orientated
to permit easy access for maintenance
FLOW
Connect water supply pipes to the ser-
vice valves and make good all the joints.
Check that all connections are water tight.
10
Installation: plumbing continued…
