ARMIGA User Guide v0.8
○ Place the chip in the supplied programmer (for other programmers,
please refer to its documentation), making sure the half circle on top of
the chip and the half circle on the programmer socket are on the same
side (pointing to the miniUSB connector).
○ Plug the programmer on the computer and launch MPLAB-X.
○ Create a new MPLAB-X project from HEX file:
■ In MPLAB-X, go to
File->Import
and choose the
Hex/ELF
option.
■ In the wizard, select the hex file you’ve downloaded from our
website and set:
● Family: 32-bit MCUs (PIC32)
● Device: PIC32MX250F128B
● Hardware
Tool:
Starter
Kits
(PKOB)
<your_serial_number>.
○ Only for Armiga Hack Edition with the supplied
programmer. For other programmers, please
read your documentation
32
