background image

Armcor

XEP Installation Manual

6

Unpacking and Inspection

 

 The unit should be inspected upon delivery for possible external damage incurred 
during transport. If damage is evident it should be noted on the freight docket and 
contact is to be made with the Armcor Air Solutions sales office. A claim should be 
lodged with the shipping company within 3 days if goods are damaged or incomplete. 
No claims will be recognised after this date.

 

 IF MAJOR DAMAGE IS APPARENT, DO NOT LIFT UNIT ON TO SITE WITHOUT PRIOR 
APPROVAL FROM ARMCOR.

 

 

 The unit was tested and inspected prior to packing and was in perfect condition at  
the time at time of despatch.

 

Check unit rating plate to ensure the correct unit matches the job specifications.

Unit Handling

 

 Protective crating or packaging and the pallets should not be removed until the unit is 
at the point of installation.

 

When removing packaging or crating, be careful not to damage, scratch or dent the unit. 

 

 After removal of packaging, all removable access panels should be opened to inspect 
for unit internal damage.

 

4.1

4.2

4.

Installation  

Instructions

/ 4. Installation Instructions

Summary of Contents for AHU 25000




















Reviews: