background image

Armcor

XEP Installation Manual

13

Maintenance  

Schedule

8.

/ 7. Maintenance Schedule

8.1

8.2

8.3

General

 

All Armcor equipment is designed for easy maintenance.

 

 Preventative maintenance programs will vary according to actual operating conditions 
and location and hours of usage by the client.

 

 Armcor Air Solutions are pleased to provide expert advice on special service 
maintenance requirements for particular installations.

 
 

IMPORTANT: Failure to carry out regular maintenance with a licensed and reputable 
service company may render warranty claims invalid, if faults have been caused by 
lack of proper maintenance. Armcor Air Solutions may request to see the maintenance 
schedule carried out.

Monthly Maintenance Schedules

 

 Monthly maintenance is usually focused on air filters and visual checks to monitor 
any operational deficiencies. The type of filter and frequency of cleaning should be 
addressed by the installing contractor to suit the customer’s requirements.

 

 Filters should be inspected immediately after installation to confirm the frequency  
of cleaning needed for the particular location. Regular change/clean of filters is 
necessary to ensure normal operating conditions.

 

Check condensate drain (if applicable) for free drainage.

Guide to How Frequency According to  

Usage is Established

 

 

Disposable Corrugated Filters. 

Ordinary disposable corrugated filters should last 

approximately one month in normal commercial use, or longer depending on usage.

 

 Cleanable  Filters.

 If filters are cleanable, they should be cleaned once a month and  

the filter media should be replaced every 12 months.

Summary of Contents for AHU 25000




















Reviews: