ARMANNI CP LIGHT evo 030, Operator'S Manual

Page: 36 / 43

Instruction
handbook - Maintenance
ARMANNI
5.4.1 Operator's qualification
 The routine maintenance operations can be carried out by the user in safe
conditions after having read carefully all recommendations and instructions of this
section.
 It is advisable for the machine user to take care of the machine maintenance as
well.

The maintenance operations can be carried out by using normal mechanical tools.
5.4.2 Cleaning
Cleaning products and tools
For the machine cleaning it is necessary to have:
 Plastic spatula

Sponge or cloth
 Compressed air gun
 Protective glasses
Cleaning products
For the cleaning operations a normal detergent and non-potable water are sufficient.
Cleaning procedures
Prepare the machine for the cleaning.

Lower the forks up to lower position
 With a plastic spatula, a sponge or a clean wet cloth remove the residual materials
on the forks.

Lift the forks up to the maximum height position
 Position the switch on (OFF)
 Clean the remainder of the machine.

ATTENTION
The truck must not be washed with bolts of water or steam cleaning machine. This operation may
cause serious damages to the electric installation.
5-5