ARMANNI CP LIGHT evo 030, Operator'S Manual

Page: 20 / 43

Instruction handbook - Installation
ARMANNI
Where: G = whole capacity referred to the whole storage area, expressed in (KN)
P = machine weight, expressed in (kg)
K = fixed increased coefficient, in order to include the packaging weight in the
calculation
9,81 = gravity acceleration expressed in (m/S²)
And consequently a unit load (C) equal to:
G . 1000 KN . 1000
C = = = .........N/m²
S m²
Where: C = minimum unit load, expressed in (N/m²)
S = support surface, expressed in (m²)
3.1.2 Environmental characteristics of the storage area
 Temperature admitted: from 0° C to 40° C+/-5° C.

Relative humidity admitted: from 30% to 90% +/-5%
3.2 Transport
3.2.1 Transport conditions
The machine shall be transported in the following conditions:
Position the truck with the forks lowered
 Cover completely the truck with a plastic covering to protect the machine from
atmospheric agents.
The machine is normally delivered wrapped in a cellophane cloth.
ATTENTION
If there should be particular height problems in the vertical positioning, the truck can be
positioned horizontally on one side (left or right, indifferently) removing the battery and
putting a cap to the oil tank before carrying out the operation.

The bolts and any other material supplied with the machine shall be put into plastic
bags.
Total weight
See technical specifications
3.2.2 Transport
During the transport, the machine shall be correctly covered with cellophane and
fastened to the means of transport so as to avoid movements or turnovers. During
transport operations avoid impacts or turnovers.
3.2.3 Lifting
Lifting equipment
For the lifting of the machine components use:
3-2