ARMANNI CP LIGHT evo 030, Operator'S Manual

Page: 22 / 43

Instruction handbook - Installation
ARMANNI
Check in particular the condition of the following components:
 Lifting stem and cylinder of the lift truck

Chain and chain pivots
 Limit switches
 Emergency switches

Motor feed cables
 Hydraulic pump
 Control panel
Machine cleaning
Remove the machine dust an dirt sue to the transport. Use a rag or compressed air.
In case of damages
Before using the machine, it is necessary to check its conditions.
The damages due to transport are attributed to the carrier and immediately
communicated to the supplier.
3.3 Collocation
The physical characteristics and pre-arrangement procedures of the collocation areas of
the truck are described as follows:
3.3.1 Physical characteristics of the collocation area
Space requirements
The machine simply needs a work area suitable for its dimensions supplied in the
Technical specifications in order to obtain a good manoeuvrability; the work surface shall
be flat and smooth.
Flooring
The floor shall have a slope not over 1% and be without holes.
Furthermore, the floor shall assure a whole work capacity (GL) equal to:
(P + Q) . 9,81 (Kg + Kg) . 9,81 m/S²
GL = = = .........KN
1000 1000
Where: GL = whole work capacity expressed in (KN)
P = machine weight expressed in (Kg)
Q = machine capacity expressed in (kg)
9,81 = gravity acceleration expressed in (m/S²)
3-4