Figure 2: Removing the stacks
Removing the stacks
1. Unlatch and remove the cap from the device.
2. Remove the stack in the middle first.
3. Remove other stacks one by one.
Remove Stacks
Figure 3: Loading the stacks
3. Remove other stacks one by one.
4. Replace and latch the cap.
Loading the stacks
1. Unlatch and remove the cap.
2. Place two triangular vaccine stacks and one square
vaccine stack into the device. The square stack is in the
middle of the two triangular stacks. Push the vaccine
stacks against the inside wall of the device.
3. Place one of the other three square vaccine stacks into
Insert Side Stacks
3. Place one of the other three square vaccine stacks into
the center of the device. Push the vaccine stack against
one of the inside walls of the device.
4. Repeat step 3 with another of the square vaccine stacks,
positioning it against the inside wall of the device
opposite the vaccine stack. This will leave a space in the
center of the device for the third vaccine stack
5. Place the last square stack into the center of the device.
6. Replace and latch the cap.
Note: All the vaccine stacks may need to be adjusted in
Insert Bilateral Stacks
Note: All the vaccine stacks may need to be adjusted in
order for the all vaccine stacks to fit into the device.
8
Insert Middle Stack
Summary of Contents for YBC-10
Page 6: ...PARTS OVERVIEW 5 ...
