INSTALLATION
Preparation
•
Read the user manual carefully.
•
Remove all packaging material, including the foam base and tape.
Note: Discard plastic wrappers and bags safely, to avoid suffocation of children .
Note: Discard plastic wrappers and bags safely, to avoid suffocation of children .
•
Check that all parts are not damaged. If you observe any damage, please inform your
supervisor.
Positioning the Device
There’s a switch on the solar power connection liner. Please fix it on the wall or other
readily accessible place.
•
Device must not be placed in or around flammable or corrosive gases that could cause
an explosion or electric shock.
an explosion or electric shock.
•
Place the device on a flat and solid ground and ensure the unit is level.
•
Locate and use the device in a dry, well-ventilated place.
•
Keep device away from
direct sunlight
and away from any other heat sources.
•
After loading the vaccine, the device must remain upright.
•
In order to prevent rust or electrical leakage, the device should not be placed in a high
humidity environment or in a location where it could be splashed with water or rain.
The system, when completely installed should look similar to the drawing below.
Note: Please see Solar Panel Instruction Manual for the preparation and installation of solar
panel.
6
Summary of Contents for YBC-10
Page 6: ...PARTS OVERVIEW 5 ...
