Arkray SillHa LH-4912 Operating Manual Download Page 34

Page: 34 / 76

ARKRAY



Check the preview of the result sheet.

REFERENCE

• To magnify the display, click on the sheet. To return to its original display,

click [-].

• To correct the result sheet, click [Back].

• To correct the medical chart number and patient name, click [Edit]. On the

[Name] screen, correct the medical chart number or patient name, and click

[OK].



Click [Print] to start printing.

• Printing will start.



To create a PDF of the result sheet, make this choice on your print screen, and
save to location of your choice.

REFERENCE

• To continue measurements, click [Menu] to return to the Top menu screen,

and go to “2.3.2. Enter the Patient Information on the PC” on page 27.

2.5.3 Example of Printing a Result Sheet

REFERENCE

All result sheets are printed on letter size paper.

NOTE:

You may be able to attach the PDF to your patient electronic chart.

IMPORTANT:

For test results obtained at a measurement temperature below 68ºF (20°C),
the temperature is printed in blue. Cariogenic bacteria and ammonia results
may not be accurate at this temperature.

2.5.2

Summary of Contents for SillHa LH-4912













































































Search results

Summary of Contents for SillHa LH-4912

Reviews:

Related manuals for SillHa LH-4912

Brands by name

Popular brands

Arkray SillHa LH-4912, Operating Manual

Search results

Summary of Contents for SillHa LH-4912

Reviews:

Related manuals for SillHa LH-4912

Brands by name

Popular brands