Arkray SillHa LH-4912 Operating Manual Download Page 19

Page: 19 / 76

SillHa Oral Wellness Instrument

1.5.3 Connecting the Instrument, PC and Printer

Use the USB cable provided to connect the instrument to the PC.

• For details on how to connect the printer to the PC (optional), read the

appropriate printer operating manual.

1.5.4 Set Initial Settings on Instrument



Ensure the SillHa software

is not running

on the PC.



Press and hold the power button.

• Remove your finger when a beep is

heard and the screen lights up.

• The test strip holder extends from the

instrument.

• A beep is heard again and the Top

menu screen is displayed.



Press and hold the power button again,
and remove your finger once the test

strip holder will start moving.

• The test strip holder will retract inside

the instrument.

• The display and instrument power will turn off.



The initial settings are now complete.

Instrument

Printer

USB cable
(accessory)

* SillHa software has

already been installed

Test strip
holder

Power button

1.5.3

Summary of Contents for SillHa LH-4912













































































Search results

Summary of Contents for SillHa LH-4912

Reviews:

Related manuals for SillHa LH-4912

Brands by name

Popular brands

Arkray SillHa LH-4912, Operating Manual

Search results

Summary of Contents for SillHa LH-4912

Reviews:

Related manuals for SillHa LH-4912

Brands by name

Popular brands