Arkray Gluocard Shine Express User Manual Download

Page: 49 / 59

www.arkrayusa.com

Caring for the GLUCOCARD Shine Express System

• To minimize the risk of transmission of bloodborne pathogens,

the pre-cleaning and disinfection procedure should be

performed as recommended in the instructions below.

• Wash your hands thoroughly with soap and water after

handling the meter, lancing device or test strips.

• If the meter is being operated by a second person who is

providing testing assistance to the user, the meter and

lancing device should be disinfected prior to handling by

the second person.

Pre-cleaning and Disinfection

The pre-cleaning procedure is needed to clean dirt as well as

blood and other body fluids on the exterior of the meter and

lancing device before performing the disinfection procedure.
The disinfection procedure is needed to prevent transmission of

bloodborne pathogens.
• For the meter and lancing device, this pre-cleaning and

disinfection procedure should be performed

once a week.

NOTE

• The life span of a GLUCOCARD Shine Express meter is

5 years. We recommend disinfecting both the meter and

lancing device at least once a week. We have validated

a total of 260 cleaning and disinfecting cycles (260 pre-

cleaning and 260 disinfection cycles) to represent weekly

cleaning and disinfecting over the life of your meter and

lancing device.

• 1 pre-cleaning and 1 disinfection cycle per week X 52

weeks per year X 5 years = 260 pre-cleaning and 260

disinfection cycles.

Summary of Contents for Gluocard Shine Express




























































Search results

Summary of Contents for Gluocard Shine Express

Reviews:

Related manuals for Gluocard Shine Express

Brands by name

Popular brands

Arkray Gluocard Shine Express, User Manual

Search results

Summary of Contents for Gluocard Shine Express

Reviews:

Related manuals for Gluocard Shine Express

Brands by name

Popular brands