www.arkrayusa.com
27
Step 3
Shake the GLUCOCARD Shine
Control Solution bottle before
each test.
Remove the cap and squeeze the
bottle to discard the first drop.
Wipe the tip with a clean tissue
or cloth. Dispense a drop of
control solution onto a clean non-absorbent surface. It helps to
squeeze a drop onto the top of the cap as shown.
After the
symbol appears on the display, apply the
solution to the narrow edge of the test strip until the meter
beeps. Make sure the confirmation window fills completely.
NOTE
• The meter may switch off if the control solution sample
is not applied within two (2) minutes of the
symbol
appearing on the screen.
• If the meter turns off, remove the test strip, reinsert, and start
from Step 1.
Summary of Contents for Gluocard Shine Express
Page 1: ...User Manual For single user home use only ...
Page 4: ......
