manualshive.com logo in svg

Arkray Gluocard Shine Express, User Manual

Share
Download
Arkray Gluocard Shine Express User Manual Download Page 42

42

   www.arkrayusa.com

Step 2 Viewing Averages

Press the < button to view 1-, 7-, 14-, 30- and 90-day average 

values, and the number of tests performed for the last test period.

< 

button

> 

button

Average

(1, 7, 14, 30, 90 days)

Voice prompt:

 

“The average for ninety days 

of total measurements is one 

hundred thirty three milligrams  

per deciliter”

Voice prompt:

 

“The average for seven 

days of total measurements 

is one hundred eighteen 

milligrams per deciliter.”

Step 3 Viewing Pre-meal Averages

Continue to press the < button to view 1-, 7-, 14-, 30- and 90-day 

average values, and the number of tests performed  

pre-meals with the   symbol for the last test period.

< 

button

> 

button

Pre-meal

Average

(1, 7, 14, 30, 90 days)

Voice prompt:

 

“The average for ninety days 

of pre-meal is ninety nine 

milligrams per deciliter.”

Voice prompt:

 

“The average for one day 

of pre-meal is ninety two 

milligrams per deciliter.”

Summary of Contents for Gluocard Shine Express




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands