manualshive.com logo in svg

Arkray Gluocard Shine Express, User Manual

Share
Download
Arkray Gluocard Shine Express User Manual Download Page 30

30

   www.arkrayusa.com

CAUTION

To avoid infection when drawing a sample: 

• 

Do not

 use a lancet more than once.

•  

Do not

 use a lancet that has been used by others.

•  Always use a new sterile lancet.

• Keep the lancing device clean.

 

NOTE

•  Repeated puncturing at the same sample site may cause pain 

or skin calluses (thick hard skin). 

• Choose a different site each time you test.

Using the Lancing Device

Adjustable Tip

Lancet Holder

Charger

Release Button

Ejection System

Lancet

You will need a lancing device in order to collect a blood sample.
You may use the lancing device that is included in the 

GLUCOCARD Shine Express Blood Glucose Monitoring System 

or any other medically approved lancing device.

•  The lancing device is for use by a single user 

only

 and should 

not be shared with anyone. 

•  Use a soft cloth or tissue to wipe the lancing device. If 

necessary, a small amount of alcohol on a soft cloth or tissue 

may be used.

Summary of Contents for Gluocard Shine Express




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands