24
www.arkrayusa.com
Setting the Test Strip Expiration Date Indicator
Step 1 Entering the Expiration Date Setting
Step 2 Setting the Expiration Year
Press and hold the < and > buttons at the same
time for three (3) seconds to enter the expiration
date settings.
After all segments flash across the screen, ‘EP’ will
show up, and you will hear a voice prompt say ”Set
expiration date of the test strip“.
A number indicating the year will blink in the left
corner of the screen. You will hear a voice prompt
say ”Set years”.
Press the < or > button until the correct
year appears.
Press the button to confirm the year and go to
the next step. You will hear a voice prompt say
“Set month”.
NOTE
• The test strip expiration date is printed on the test strip vial.
Step 3 Setting the Expiration Month
A number indicating the month will blink at the
bottom of the screen.
Press the < or > button until the correct month
appears.
After setting the month, press and hold the
button for three (3) seconds to save your setting
and turn off the meter.
Voice prompt:
“Two thousand
twenty”
Voice prompt:
“October”
In this example, you will hear a voice prompt say “The set
expiration date of the test strip is October Two thousand twenty”.
Summary of Contents for Gluocard Shine Express
Page 1: ...User Manual For single user home use only ...
Page 4: ......
