Arkray Assure 530001, Reference Manual

Page: 20 / 52

14
SECTION
B
INSERTING OR REPLACING THE BATTERIES
The Assure® Prism multi Blood Glucose Meter uses two 3.0 V lithium batteries. Before using the
meter, check the battery compartment and insert batteries if empty. When the
symbol
appears on the display while the meter is in use, the batteries should be replaced as soon as
possible. The test results may not be saved if the batteries run out.
Step 1
Make sure the meter is turned off. Push the cover in the direction of the arrow
to open the battery compartment.
Step 2
To remove the used batteries, place your finger under each battery and pull
upward. Insert two new batteries with the + side facing up and make sure the
batteries are inserted firmly.
Step 3
Slide the cover back on the battery compartment. Push down until
you hear the tab click into place.
NOTE
• Removing the meter batteries will not affect your stored results. You may, however, need to
reset your meter settings.