Arkray Assure 530001, Reference Manual

Page: 13 / 52

7
SECTION
B
Meter Operation and Set-up
METER SET-UP
You should check and update the meter settings such as time and date before using your meter
or after changing the meter batteries. Press and hold the button for 3 seconds to enter the SET
mode. Whenever you want to complete the settings and exit from the SET mode, press and hold
the button for 3 seconds again. Press or to reach the accurate value. Press and hold to
scroll faster.
Adjusting the Date and Time
Step 1: Entering the SET Mode
Press and hold the button for 3 seconds. After all the segments flash across the
screen, SET will be displayed on the screen. Press the button again to progress
to the next step.
Step 2: Setting the Year
Press or until the correct year appears. Press and hold button to scroll
through the numbers quickly. After setting the year, press the
button to confirm
your selection and progress to the next step.
Step 3: Setting the Month
A number indicating the month will be blinking on the left corner of the screen.
Press or until the correct month appears. Press the
button to confirm your
selection and progress to the next step.
Step 4: Setting the Date
Press or until the screen displays the correct date. Press the button to
confirm the date and progress to the next step.
Step 5: Setting the Time Format
The meter can be set in, 12-hour (AM/PM) or the 24-hour clock format.
Press or to select a format. AM/PM is not displayed in the 24-hour format.
After selecting the format, press the button to progress to the next step.
Step 6: Setting the Hour
Press or until the correct hour appears. After the hour is set, press
the
button to progress to the next step.
Step 7: Setting the Minute
Press or until the correct minute appears. After setting the minute,
press the button to progress to the next step.