14
Assembling Instructions
Fig. 12
11. Slide the four individual autolock end stoppers towards the four ends of the two parallel
tracks, to prevent the mobile XY track from running into any of the corner brackets.
12. Tighten the setscrews on the end stoppers using a 6 mm Allen key. Make sure that the
lockwashers are installed in their correct positions.
13. Insert the white plastic caps onto the ends of the 4 tracks.
Levelling the assembly
14. Place a bubble level on one of the horizontal tracks.
15. The first person can raise the posts from the ground while the other adjusts the level by
rotating the bottom of the levelling feet until the horizontal track is perfectly horizontal.
16. Move the bubble level to the next horizontal track and repeat previous steps until the entire
rack is perfectly levelled.
CAUTION: Make sure that the lockwashers are installed at the proper locations.
ALLEN KEY 8MM
NOTE: Levelling the assembly must be performed prior to mounting the mobile track to the
system. Two people are needed to level the Semi-Permanent Rack system.
Do not place hands under the posts, grab the levelling feet by its side to prevent risk of pinching
fingers when adjusting.
Do not force the levelling feet to extend beyond its maximum adjustable height of 25,4 mm (1 in).
