11
Assembling Instructions
• Tighten the M6 x 10 HC screws to a torque of 4 N•m (3 lbf•ft).
Fig. 7
End Stoppers
5. End stoppers must be securely positioned in various places within the Semi-Permanent
Rack system. These stoppers:
• prevent collision contacts between the mobile XY track and the corner brackets;
• make the installation safer by greatly reducing the risk of the mobile track shifting from
its position in the event that the end of the track should be subjected to a violent impact;
• prevent the possibility of the installed track lift from falling from either end of the mobile
track.
Look carefully for information concerning the various installation locations for end stoppers in
the following assembly instructions.
Torque both
screws to 4 N•m
(3 lbf•ft).
Turn
clockwise to
raise post.
Maximum
elevation
25,4 mm (1 in).
