Page | 15
Commercial in confidence. User Manual Revision CTK-REV7-14082019
5. GENERAL BED OPERATION
-
Continued
CAUTION
•
Disconnect the bed power cord before moving the bed.
•
Do not remove the power cord from the source by pulling on the cord.
•
Do not use the beds side rails to manoeuvre the bed.
•
Do not pull on the power cord, or handset cord to manoeuvre the bed.
•
Always apply the brakes when the bed is in a stationary position.
5.2 Bed Extension
-
IF FITTED
The integral bed extension is
located at the foot of the bed and is
extendable to 19.5cm from its
normal closed position.
To Extend:
Apply the central
locking brakes. Pull up on the
Release Handle and applying a
central force pull out from the
mattress platform. The Bed
Extension automatically locks
when fully extended and the latch
lever is released.
To Close:
Reverse the above
operation.
5.3 Linen Rack
-
IF FITTED
The Linen Rack is used to rest
clean linen on whilst bed sheets
are being changed. The Linen
Rack is located at the foot end of
the bed and extends by 30cm.
To extend:
Using two hands on
the soft coated handle simply pull
the friction held stripper rail
towards you until it stops in its fully
extended position.
Reverse to Close
CAUTION
•
The Linen Rack load should not exceed 10Kg
•
Do not leave the Linen Rack in the extended position when not in use.
