36
6. settings - adjustment - problem identifi cation parameters
6.1 Accessing the settings - adjustment - problem
identifi cation parameters
The boiler can be used to manage the heating and domestic
hot water production system in its entirety.
Navigation within the menus enables the boiler
connected peripheral units to be customised, optimising
operation for maximum comfort and maximum saving. It
also provides important information relating to the effi cient
operation of the boiler.
The parameters are listed in the following pages.
The various parameters can be accessed and modifi ed using
the
“+”
and
“-”
buttons and the
“+” OK
and
“-” ESC
buttons
(see fi g. below).
OK
E
S
C
1
6
1.
Programming
“+”
and
“-”
key, to access and
modify the parameter
6.
Programming
“+”
OK
key, to save the changes of
parameters value
Programming
“-” ESC
key, to exit from the
parameters
The information relating to the parameters are indicated on
the display.
Caution!
The menus reserved for qualifi ed technicians may
only be accessed after setting the access code.
To access to the parameters proceed as follows:
1. Press simultaneously the
“+”
e
“-”
buttons for 5 seconds
The display requires the acces code,
222
222
will appear on the display
2. Press the
“+”
button to select code
234
234
.
3. Press the
“+” OK
button to access the
parameter list
4. On the display will appear the fi rst
parameter
220
220
5. To select the parameters press the
“+”
button.
- example: modify the parameter
231
231
6. Press the
“+” OK
button to access the
parameter. The display will indicate
the value “eg:
70
70
”
7. Press the
“+”
and
“-”
buttons to
select the new value, e.g. “
75
75
”.
8. Press the
“+” OK
button to save the
change or press
“-” ESC
to exit
without saving.
To exit, press the
“-” ESC
button until the normal display
screen is restored.
Fig. 6.1
Summary of Contents for EGIS HE 24
Page 63: ......
