Ariston Thermo MGM 2-ZONE HOT/COLD, Installation And Operating Instructions Manual

Page: 24 / 90

24 - EN
This manual constitutes an integral and
essential part of the product. Read the
instructions and warnings carefully as
they provide important information on
installation, operation and maintenance
safety.
The technical notes and instructions in
this document are provided to help in-
stallers perform the installation process
correctly, in accordance with the best
working standards.
The module is designed to control mul-
tizone/multitemperature heating sys-
tems.
It is strictly forbidden to use the device
for purposes other than those speci-
fied. The manufacturer shall not be held
liable for any damage due to improper,
incorrect or unreasonable use or due
to failure to comply with the indications
outlined in this manual.
The installing technician must be
qualified to install heating applianc-
es in accordance with Law 46 dated
05/03/1990, on completion of which
task the above mentioned technician
must issue the customer with a declara-
tion of conformity.
Design, installation, maintenance and
any other interventions must be carried
out in full conformity to applicable regu-
lations and any instructions provided by
the manufacturer.
Incorrect installation can harm persons
or animals and damage objects; the
manufacturer shall not be held liable in
such cases.
The zone module is delivered in a pal-
let. Once you have removed all the
packaging, make sure the appliance
is intact and that no parts are missing.
Should this not be the case, contact the supplier.
Keep all packaging material (clips, plas-
tic bags, expanded polystyrene, etc.)
out of reach of children, as it may be
potentially dangerous.
Before any work is carried out on the
module, make sure that the power sup-
ply is cut off by turning the external
switch to the “OFF” position.
Any repairs must be carried out by
qualified technicians using original
spare parts only. Failure to comply with
the above may jeopardise the device’s
safety and void the manufacturer’s li-
ability.
When cleaning the external parts of the
device, switch the module off by turning
the external switch to the “OFF” posi-
tion.
Use a damp cloth soaked in soapy
water to clean the device. Do not use
aggressive detergents, insecticides or
toxic products.
CE mark
The CE mark guarantees that the de-
vice conforms to the following direc-
tives:
- 2004/108/EC concerning electro-
magnetic compatibility
- 2006/95/EC concerning the safety
of electrical equipment
Overview