2. INSTALLATION
2.1. Charger
Before you use the telephone for the first time, you must make sure the batteries are charged for 15
hours. If you don’t do this, the telephone may not function to its full range potential.
Installation of the charger:
- Plug one end of the adapter into a power outlet and the other end into the adapter jack on the side of
the charger.
DC power
Plug in
CHARGER
CONTACTOR
2.2. Batteries in Handset
- Open the battery compartment (see below)
Put the 3 rechargeable batteries (AAA, 550mA) in the battery compartment
- Close the battery compartment.
- Leave the handset on the charger for a minimum of 15 hours for the initial charge.
Battery indicator:
Battery indicator:
The battery is fully charged.
The battery is ¾ charged 75%)
The battery is 50% charged.
The battery is low. When the battery is low, you will hear warning signals and the battery
symbol on the display will blink.
4
