4. HANDSET OPERATION
4.1. Switching the Handset On/Off
:
To switch off the handset, press and hold the Line button for 2 seconds in the standby mode.
To switch on the handset press and hold the Line button again for 2 seconds.
When the handset is switched off, no calls can be made or received.
4.2. Making an external call
4.2.1. Direct Call
• Press the Line button
, you will hear the external dial tone.
• Enter the telephone number and wait for connection
• “
L1 Busy
” =
L1 Line in use
• “
L1 L2
” =
Both lines in use
•Press the Line button
During conversation, for a minimum of 2 seconds. You can now make the
conversation handsfree via the built-in speaker and microphone.
Press the Line button again for 2 seconds to stop the hands free mode or press the line key for a short
duration to disconnect the call
4.2.2. Pre- dialing
• Enter the telephone number. If needed, you can erase digits by pressing the Erase button “
C
”.
• Press the Line button
. The phone number will be dialed automatically.
4.3. Making an Internal Call
If you have more then one handset subscribed to the PABX, you can make an internal call between the
Handsets
• Press
OK / INTERCOM
key
• Press a handset No. The called handset will ring
• Press ‘line key’ on the called handset and start talking
Version 1.3 February 2004
11
