NOTE! Aux input is connected to line 1 and can be used to connect a modem, fax, or ordinary
handset type phone. If the Aux input is using line 1, then line 1 will not be available to the
system until the Aux call has ended.
Base Station setup
Plug one end of the adapter into the power outlet and the other end into the adapter jack on the bottom
of the base.
Connect one end of the telephone cord with the analogue (PSTN) phone jack (RJ11) and the other end
to the back of the DECT PABX station into the Line 1 jack.
Do the same for Line 2.
6
