10
Quick Start Guide: 7000 Series 1 RU-Gen 3 Data Center Switches
Two-Post Rack Mount
Chapter 3: Rack Mounting the Switch
3.1.1
Attaching Mounting Brackets to the Chassis
This procedure attaches mounting brackets to the switch chassis (
Figure 3-3
).
Step 1
Align the mounting brackets with the attachment pins to obtain the desired mounting position.
Step 2
Place the bracket flush on the chassis with attachment pins protruding through key-openings.
Figure 3-1: Bracket Mount Examples for Two-Post Rack Mount
Figure 3-2: Improper Bracket Mount Examples for Two-Post Rack Mount
Step 3
Slide the bracket toward the front flange until the bracket clip locks with an audible click.
Figure 3-3: Attaching the Mounting Brackets to the Switch Chassis
To remove the mounting bracket from the chassis
, lift the front edge of the mounting bracket clip
with a flathead screwdriver and slide the bracket away from the front flange (opposite from the
installation direction).
Rear mount
Front mount
Center mount
Attaching the brackets: Front mount
Bracket Clip
Step 3
Bracket Clip
Step 2
Step 1
