7
Automatic Power Saving
If you have compliance display card or software installed in your PC, the display can
automatically reduce its power consumption when not in use. If an input from a keyboard,
mouse or other input device is detected, the display will 'wake up' automatically.
IMPORTANT:
Always activate a screen saver program during your application. If a still image in high
contrast remains on the screen for an extended period of time, it may leave an ‘after-image’
or ‘ghost image’ on front of the screen. This is a well-known phenomenon that is caused by
the shortcomings inherent in LCD technology. In most cases, the after-image will disappear
gradually over a period of time after the power has been switched off. Be aware, that the
after-image symptom cannot be repaired and is not covered under warranty.
Unpacking
Unpack the package and inspect the items closely to make sure no item is damaged and
all items listed are present in your package:
Adaptor x1
AC power cord x1
Drive CD rom x1
Display x1
RS232 cable x1
VGA cables x1
Screws
Summary of Contents for ADM-1800 Series
Page 2: ......