17
Installing
1. Panel mounting
This display panels can be placed on a shelf or table, or mounted onto a control panel. To
mount them onto a control panel you need a kind of mounting kits, which you will
fi
nd in the
accessory box. Take the mounting steps described here below:
•
Set the display panel within the aperture in your control panel
•
Slide the mounting kits into the slots on the chassis cover
•
Tighten the bolt in the kits until the display panel is
fi
rmly secured to the control
It is very important to locate the unit in a suitable environment. Make sure
the place has good ventilation, is out of direct sunlight, away from sources
of excessive dust, dirt, heat, water, moisture and vibration.
Model Number Cutout W
D
x H
D
ADM-1806
7.49”x5.68”
ADM-1808
8.75”x6.6”
ADM-1810
10.55”x7.9”
ADM-1812
11.76”x9.18”
ADM-1815
13.56”x10.93”
ADM-1817
14.85”x12.31”
Model Number Cutout W
D
x H
D
ADM-1818
17.21”x10.82”
ADM-1819
16.81”x13.61”
ADM-1820
17.3”x14.6”
ADM-1821
19.72”x12.15”
ADM-1824
23.02”x13.61”
2. Cutout size
Summary of Contents for ADM-1800 Series
Page 2: ......
