3.1.2
Inserting the Switch into the Rack
This procedure attaches the switch to the rack (
).
1. Lift the chassis into the rack. Position the mounting ears against the rack posts.
Note: The mounting ears should be at the same height to ensure that the device is level.
2. Select mounting screws that fit your equipment rack.
3. Attach the mounting ears to the rack posts.
Figure 3: Inserting the Switch into the Rack
After completing the two-post rack mount, proceed to
.
3.2
Four-Post Rack Mount
Note: For DCS-7020SR-32C2, four-post rack kits are optional and sold separately.
The switch is mounted onto a four-post rack by assembling two rails onto the rear posts, sliding the
switch onto the rails, then securing the switch to the front posts.
The installation kit provides the following four-post mounting parts:
•
2x mounting brackets
•
2x rail-rods
•
2x rail-slides
The rail-rods and rail-slides assemble into two identical slide-rails.
3.2.1
Attaching Mounting Brackets to the Chassis
This procedure attaches mounting brackets to the switch chassis as depicted by
Mounting Brackets to the Switch Chassis
1. Align the mounting brackets with the sides of the chassis.
10
