31
Tensor
2
ADVICE
!
Add feature
Adding features
Enables the entry of an access code for activation of further actuator features.
The following features can be activated by entering the access code:
• Potentiometer: Activation of the electronical potentiometer for position feedback
• Current/Voltage output: Activation of the current/voltage output for position feedback
• i-Act: Activation of the electronical potentiometer, the current/voltage output for position feedback and activation
of the potentiometer input and the current/voltage input for controlling the actuator via set value signals ([mA]
& [V]).
If you are interested in any additional feature, please contact the ARIS sales department and have the serial number of
the mounted electronics ready (check INFO MENU "Serial-No.").
POWR. MENU (Power menu)
Torque/Speed
Torque/Actuating speed
Enables the setting of pre-defined torque/time combinations.
The setting of the torque/time combination can be made separately and differently for both turning directions "CCW"
and "CW".
INFO MENU (Information menu)
Firmware
Displays the firmware version of the electronics.
Hardware
Displays the version of the electronics hardware.
Serial-No.
Serial number
Displays the serial number of the actuator´s electronics.
The serial number of the electronics is used for the activation of additional actuator features and may be asked by the
ARIS customer service.
Features
Functions/Features
Shows active features/functions and further available features/functions of the actuator.
The status of the different functions is marked as follows:
Example for feature/function "POTI":
Feature/Function activated: > POTI*
Feature/Function not activated: > POTI
