- 15 -
11.1 OPERATION and SHUT-DOWN CONTROLS BEFORE OPERATING
Please read operation, use and maintenance manuals before start up for economic and safe use. Wrong
operation can cause a fire or explosion which may result property damage, personnel injury, or loss of life.
The air settings for wood gasification burning are set on the factory and should only be changed by an
authorized service. They are located on the bottom door and can be adjusted after removing the bottom door cover
plate.
Preliminary checks before operating
Before operating,
•
Check the system water level and pressure
•
Check the ventilation openings are free from obstacles.
•
Check the valve positions and be sure that all the water circulation valves are open
•
Check all the cleaning and servicing parts are securely closed and tight
•
Check the open vent system, and or all the safety devices are present and operating in a correct and
sufficient way.
•
Check all the sensors have in their correct position.
•
Check the circulation pumps functioning and the direction of rotation.
•
Check the presence of any kind of inflammable substance in boiler room
•
The boiler can be operated only in accordance with these instructions in order to work properly.
•
It can be operated only by an adult.
Browsing Menu:
Push P3 button to enter in the User Menu.
Using P4 and P6 buttons it is possible to select the desired Menu or Submenu. Push P3 button to
enter in the desired Menu or Submenu.
The Setting menu consists of the parameter name (first and second row), the minimum, the
maximum and the value ("Set") current.
By pressing again button P3 you enter edit mode (the "Set" field flashes);to decrease or increase
value push the buttons P4 or P6; to save the new value push the button P3; to cancel the modifies and
restore the old parameter’s value push the button P1.
If a parameter value is changed, the new value is sent to the control board; if the transmission
failures appears the message:
