EN - 18
WASH DECK
See Figure 23.
Occasional deck cleaning with the washout
port prevents debris buildup and maintains
cutting efficiency.
IMPORTANT:
Use of the washout port may
deposit a dark-green residue on surface
where deck was cleaned.
1. Move unit to a flat, level surface.
2. Stop engine, wait for all moving parts to
stop and for hot parts to cool.
NOTICE:
DO NOT use washout port when
mower is warm from operation.
3. Secure coupler to garden hose.
4. Firmly push coupler onto washout port
until coupler clicks.
5. Gently tug on the hose to verify coupler is
secure.
IMPORTANT:
If water leaks from coupler,
coupler is not secure.
6. Open water-supply valve.
7. Start engine and engage mower blade.
Keep blade engaged until water color
under deck changes from green to clear.
See
8. Stop engine, wait for all moving parts to
stop and for hot parts to cool. See
9. Pull lock collar away from washout port
and remove hose from port. See
Figure 24.
10. Remove coupler from hose end.
11. Start engine and engage blade for
approximately 2 – 3 minutes to remove
excess water from unit.
12. Stop engine and allow deck to dry before
storing.
Figure 23
1. Hose Coupler
2. Washout Port
Figure 24
1. Lock Collar
Summary of Contents for Razor 911173
Page 31: ......
