Ariens Razor 911173, Operator'S Manual

Page: 19 / 32

EN - 17
SERVICE PARTS
See your Ariens dealer to purchase service
parts for your unit.
SERVICE POSITION
1. Place unit on a flat, level surface.
2. Stop engine, wait for all moving parts to
stop and for hot parts to cool.
3. Drain fuel from fuel tank and fuel system.
Refer to engine manual for instructions.
4. Disconnect spark plug wire.
5. Remove discharge chute, if installed.
6. Adjust handlebar to the vertical position.
7. Rotate unit onto its right side. Make sure
unit is secure and will not tip. See
Figure 21.
CHECK ENGINE OIL
NOTICE: Engine oil level MUST be
maintained at correct level or engine damage
may occur. Refer to engine manual.
CHANGE ENGINE OIL
Refer to engine manual.
CLEAN ENGINE COOLING FINS
Cooling fins circulate air around cylinder head
and engine block. Engine may overheat if fins
are clogged or damaged.
Refer to engine manual.
CHECK AIR FILTER
Check air filter and replace if clogged or
damaged.
IMPORTANT: Cutting height MUST be set to
lowest position to remove air filter cover.
Refer to engine manual.
CHECK FASTENERS
Check for loose or missing hardware.
CLEAN GRASS BAG
Check grass bag frequently for wear.
Remove grass bag, empty grass clippings,
wash with garden hose and allow it to dry.
Replace worn or damaged bag with Ariens
original equipment only.
Clean grass clippings and other debris from
mower pan. See Figure 22.
Description Part No.
Air Filter 21100121
Spark Plug 21100123
Blade 04544400
Battery
(Model 911179) 04765800
Battery Charger
(Model 911179) 04537000
Transmission Belt
(Models 911175, 911179) 07200633
Grass Collector Bag 05088500
Fuel Stabilizer – 118 mL
(4 oz)
• Except Canada
• For Canada Only
04730400
04742500
CAUTION: AVOID INJURY.
Before placing unit in service
position, close fuel valve and drain
fuel from tank and fuel system.
(Refer to engine manual for
instructions).
Make sure unit is secure and will
not tip.
Figure 21
Figure 22