Ariens GRAVELY Sno-Thro 834035 Owner/Operator & Parts Manual Download Page 3

 

3

 

Controls & Features. . . . . . . . . . . . . . . . . . . . . . .   2

Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3

Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4

Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   7

Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   10

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . .   13

Service & Adjustments . . . . . . . . . . . . . . . . . . .   14

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   15

Service Parts  . . . . . . . . . . . . . . . . . . . . . . . . . . .   16

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .   16

Accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . .   16

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . .   16

Parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   17

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

 

THE MANUAL

 

Before operation of unit, carefully and completely read 
your manuals. If used improperly, this unit could be 
dangerous and cause personal injury or property 
damage. The contents will provide you with safety 
instructions for the safe use of your unit during normal 
operation and maintenance.

All reference to left, right, front, or rear are given from 
operator standing in operation position and facing the 
direction of forward travel.

 

MODEL AND SERIAL NUMBERS

 

When ordering replacement parts 
or making service inquiries, know 
the Model and Serial numbers of 
your unit.

Numbers are located on the product 
registration form in the unit literature 
package. They are printed on a 
serial number label, located on the 
frame of your unit. 

• Record Unit Model and Serial number here.

 

PRODUCT REGISTRATION

 

The Ariens/Gravely dealer must register the product at 
the time of purchase. Registering the product will help 
the company process warranty claims or contact you 
with the latest service information. All claims meeting 
requirements during the limited warranty period will be 
honored, whether or not the product registration card is 
returned. Keep a proof of purchase if you do not 
register your unit.

 

Customer Note:

 

 If the dealer does not register your 

product, please fill out, sign, and return the product 
registration card to Ariens or go to www.ariens.com or 
www.gravely.com.

 

UNAUTHORIZED REPLACEMENT PARTS

 

Use only Ariens replacement parts. The replacement of 
any part on this vehicle with anything other than an 
Ariens authorized replacement part may adversely 
affect the performance, durability, or safety of this unit 
and may void the warranty. Ariens disclaims liability for 
any claims or damages, whether warranty, property 
damage, personal injury or death arising out of the use 
of unauthorized replacement parts.

 

DISCLAIMER

 

Ariens reserves the right to discontinue, make changes 
to, and add improvements upon its products at any time 
without public notice or obligation. The descriptions 
and specifications contained in this manual were in 
effect at printing. Equipment described within this 
manual may be optional. Some illustrations may not be 
applicable to your unit.

 

DELIVERY

 

Customer Note: 

 

If you have purchased this product 

without complete assembly and instruction by your 
retailer, it is your responsibility to:

1. Read and understand all assembly instructions in 

this manual. If you do not understand or have 
difficulty following the instructions, contact your 
nearest Ariens or Gravely Dealer for assistance.

 

 

 

Make sure all assembly has been properly 
completed.

 

NOTE: 

 

To locate your nearest Ariens or Gravely 

Dealer, call 1-800-678-5443 or go to www.ariens.com 
on the internet.

2. Understand all Safety Precautions provided in the 

manuals.

3. Review control functions and operation of the 

unit. Do not operate the unit unless all controls 
function as described in this manual. 

4. Review recommended lubrication, maintenance 

and adjustments.

 

TABLE OF CONTENTS

INTRODUCTION

Transfer 

model & serial 

number label 

from product 

registration 

here.

 

WARNING: 

 

Improper assembly or 

adjustments can cause serious injury.

 

© Copyright 2003 Ariens Company

Summary of Contents for GRAVELY Sno-Thro 834035






























Reviews: