5 Using the ARGUS Copper Box v4
18
ARGUS Copper Box
5 Using the ARGUS Copper Box v4
First connect the ARGUS Copper Box with the USB host interface of an ARGUS tester. You
may need to enter an option key in the ARGUS tester under Settings/Device/Software
options. Then connect the device to the measurement configuration as shown in the
connection examples.
Connection example 1 (DSLAM direction):
Connection example 2 (Modem direction):
5.1 Selecting and activating the Copper Box
The chapter "Configuring accesses", page 17, explains how to set up the connection type
"Copper test".
ARGUS in the status display.
The device always measures the DC
voltage at the line socket (pins 4/5) before
executing a copper test. This value
should warn of the presence of a voltage
at the line socket (e.g. TDR, Line scope)
when a copper test is executed.
Select one of the copper tests. In this
example Copper Box.
This is not the value that the
Copper Box measures between
the Tip and Ring wire.
<Setting>
ARGUS automatically switches
to the Copper Box auto test
configuration, page 27.
Copper Box
Continued on
next page
