R-Series Technical Manual
Rev. 1.02 November 24, 2008
Argox Information Co., Ltd.
38
9.3 Clearance
CAUTION
The printer electronics are susceptible to static discharge. Wear
an anti-static wrist and attach it to the printer chassis.
There are some components need to be clean-up occasionally:
Thermal print head
The debris of thermal paper or riboon may collect on the print head causing characters or bar
codes to appear light or faded. To clean the print head, wet a soft paper towel with isopropyl
rubbing alcohol and use the damp towel to rub the dirt from the print head surface.
It is recommended to clean the print head after every roll of ribbon.
Platen roller
If the roller becoms contaminated with grit, label adhesive, or ink, printing quality may be
adversely affected. To clean the roller, using a clean cloth and alcohol, wipe off any accumulated
debris.
Media sensor
The dirt on the paper sensor will cause the miss or unstable detection of label gap. Clean it with
bristle brush or air blow once in a while.
Note:
Switch off the power before cleaning!
Summary of Contents for R Series
