R-Series Technical Manual
Rev. 1.02 November 24, 2008
Argox Information Co., Ltd.
23
8.
Click back the middle cover.
9.
Click back the top cover.
10.
Secure two attached screws (M) for the cutter.
11.
Plug the cutter cable into external connector shown in Figure 7-4.
Figure 7-4
Install the media and the ribbon after the cutter is properly installed.
1.
Put the media end on the roller.
2.
Close the printer module.
3.
Turn on the printer.
4.
Press the FEED button to let the media end to go through the cutter.
Cutter Cable
External Connector
Summary of Contents for R Series
