background image

4

Unpacking

 
Your Argon speakers were carefully tested and inspected before packaging and shipping.  
After unpacking please check for any damage.  It is rare that a unit is damaged during 
shipping, but if this does happen contact the shipping company immediately.  We 
recommend that you keep the original carton and packing material for future shipping.

Recommended Speaker Setup

It is true that proper speaker placement has a huge impact on sound quality.  There 
are many different theories, but all rooms and tastes are different so it's impossible 
to specify a correct placement.  We do suggest you experiment with a few different 
locations to see what works for you.  

As a general rule of thumb for the best soundstage balance, the speakers should be 
equi-distant from side walls and a different distance from rear walls.  For the best bass 
response on Argon, we recommend that you keep a minimum distance of 6-12" between 
the rear of the speakers and the rear wall.  For height, position the speakers with the 
tweeters at eye level of your most common listening position. 

Speaker Conditioning and Break-in

 
Although a break-in period is not required, we recommend that you play between 24
 to 48 hours of music through the speakers before doing any critical listening or speaker 
placement.  Just set your iPod to "Repeat All" and adjust the volume to normal listening 
level.  You can check out all that old stuff in your library and your neighbors will 
absolutely love you for it.  

Speaker Cleaning

We don't recommend using any solvents or cleaners on Argon cabinets or speakers.
Just wipe down with a soft, dry cloth.
 

Summary of Contents for 7340A v2













Reviews: