background image

Important Safety Instructions

 

3

1

1
1

1
1

1

1

1

1

1

Read these instructions for all components 
before using this product.
Keep these instructions for future reference.
Heed all warnings on the product and in the 
owner  guide.
Follow all instructions.
Do not use this apparatus near water or 
moisture.  Do not use this product near a 
bathtub, washbowl, kitchen sink, laundry tub, 
in a wet basement, near a swimming pool, or 
anywhere else that water or moisture are 
present.
Clean only with a dry cloth and as directed by 
the manufacturer. Unplug this product from the 
wall outlet before cleaning.
Do not block any ventilation openings. Install in 
accordance with the manufacturer  
instructions.  To ensure reliable operation of 
the product and to protect it from overheating, 
put the product in a position and location that 
will not interfere with its proper ventilation. For 
example, do not place the product on a bed, 
sofa, or similar surface that may block the 
ventilation openings. Do not put it in a built-in 
system, such as a bookcase or a cabinet that 
may keep air  from flowing through its 
ventilation openings.
Do not install near any heat sources, such as 
radiators, heat registers, stoves or other 
apparatus that produce heat.
Protect the power cord from being walked on or 
pinched, particularly at plugs, convenience 
receptacles, and the point where they exit from 
the apparatus.
Only use attachments or accessories specified 
by the manufacturer.

Servicing is required when the apparatus has 
been damaged in any way such as power supply 
cord or plug is damaged; liquid has been spilled 
or objects have fallen into the Important Safety 
Instructions apparatus ;the apparatus has been 
exposed to rain or moisture, does not operate 
normally, or has been dropped.  Do not attempt 
to service this product yourself. Opening or 
removing covers may expose you to dangerous 
voltages or other hazards. Please contact the 
manufacturer to be referred to an authorized 
service center near you.
To prevent risk of fire or electric shock, avoid 
over loading wall outlets, extension cords, or 
integral convenience receptacles .
Do not let objects or liquids enter the product as 
they may touch dangerous voltage points or 
short out parts that could result in a fire or 
electric shock.
See product enclosure bottom for safety related 
markings.
Use Proper Power Sources.  Plug the product 
into a proper power source, as described in the 
operating instructions or as marked on the 
product.

"    "

double insulated.  
An earth connection is not required. 

This symbol means that this unit is 

1

1

1

1

1

 

     Warning!

     To reduce the risk of electric shock, do not open or remove cover or back.   
     Do not expose this appliance to rain or moisture. In case of malfunction 
     consult qualified service personae.

The lightning flash with arrowhead, within an equilateral triangle, entended 
to alert the user of the presence of uninsulated „dangerous voltage“ within 
the product’s enclosure; that may be of sufficient magnitude to constitute a 
risk of electric shock to persons!

The exclamation point, within an equilateral triangle, is attended to alert the 
user of the presence of important operating and maintenance (servicing) 
instructions in the literature accompanying the appliance.

Summary of Contents for 7340A v2













Reviews: