Connecting
Your
System
Step 1 -
SPEAKER WIRE CONNECTION
1
Connect the
RED (+)
and
BLACK (-)
terminals from the left speaker to the
corresponding terminals on the right speaker using a speaker wire. Be sure to
match the red-colored side of the speaker wire with the
RED (+)
terminals and
the black-colored side to the
BLACK (-)
terminals on each speaker.
Note: As the Argon Speaker system is self-powered, do not connect the speaker
terminals to the speaker outputs of a stereo receiver.
Detailed procedure:
Remove the pre-cut insulation on the end of the speaker wire and twist
the exposed wire strands 2-3 times.
Use your thumb and finger to the unscrew the binding post connector
Insert each speaker wire into the holes on the side of binding postconnector.
Retighten the binding posts. The stripped wire portion should be secured
firmly in the connector.
Repeat the procedure to connect the other end of the speaker wire to the other
speaker. Be sure to match the wire color to the same terminal color on each
speaker. Also make sure that none of the speaker wire strands have come in
contact with an adjoining terminal.
6
1
2
STEREO INPUT
AUDIO IN
OUT TO
RIGHT
5VDC CHARGE FOR iPOD
POWER ON/OFF
R
L
SUB OUT
2
Step 2 - POWE R CABLE CONNECTION
Verify that the voltage selector switch is set to the proper voltage for your area.
Connect the power cord into the left speaker and the other end into the wall outlet.
