background image

9

V 06/17 

GENERAL SAFETY INFORMATION 

 Only use this outdoor carbon fiber heater as described in this 

manual. Any other use not recommended by the manufacturer may 
cause fire, electric shock or injury to persons. 

 Make sure that the type of mains power complies with the electrical 

requirements of the outdoor carbon fibre heater (220-240V~/50Hz). 

 This product is not a toy. Children under the age of 3 years must be 

kept out of reach unless properly supervised, to ensure that they do 
not play with the appliance. 

 This appliance can be used by children older than 8 years and by 

people with reduced physical, sensory or mental abilities, or who 
lack sufficient experience or the necessary knowledge, provided that 
they are supervised or have been instructed on how to use the 
appliance safely and understand the hazards related to its use.  

 Children must not be allowed to play with the appliance.  

 Cleaning and maintenance operations normally carried out by the 

user must not be performed by unsupervised children. 

 WARNING: certain parts of this product may become very hot and 

cause burns. Special care should be taken when children and 
vulnerable people are nearby. 

 To avoid the risk of accidentally resetting the thermal protection, this 

appliance must not be powered through an external switching 
device, such as a timer, or connected to a circuit that is switched on 
and off by the utility. 

WARNING

Do not use the carbon fib

er

 heater with a controller 

or any other device that activates the carbon fibre heater 
automatically, as there may be a risk of fire if the carbon fib

er

 

heater is covered or incorrectly positioned. 

 The carbon fiber heater heats up significantly when running and can 

cause burns. Avoid unprotected contact with the hot surface. 

 Keep flammable materials, such as furniture, cushions, blankets, 

paper, cloths, curtains and similar items at least 1 m away from the 
front, sides and back of the appliance. 

 As a rule, the carbon fiber heater must be placed at a safe distance 

(at least 2 metres away) from combustible materials and glass walls.  

 If the unit is installed in workshops or garages where flammable and 

combustible materials and paints are used, it must be installed at a 
distance of at least 4 metres from the source of the hazard.  

 Disconnect the mains power when the appliance is not in use or 

during cleaning operations. 

Summary of Contents for Daphne








Reviews: