12
V 06/17
ASSEMBLY INSTRUCTIONS
When installing the unit to a wall, make sure that you respect the minimum required distances for the product installation as
follows:
a) 50 cm from the side wall
b) 50 cm from the ceiling
c) The product must be installed at a minimum height of 180 cm
1) Insert the 4 screws provided (Explosive bolt M6*50) into the wall holes as per the diagram below.
2) After inserting the screws into the wall holes, unscrew the nuts, washers and gaskets from the screws and set them
aside for the next step.
3) Take the unit and position it for installation onto the wall. Then screw on the washers, gaskets and nuts that you set
aside.
CEILING
SIDE WALL
FLOOR
Diameter
Φ
8 mm
